Where is the Drum cardan roller universal shaft spindle coupling suitable for

Drum cardan roller universal shaft spindle coupling is mainly used in rolling mills, piercing machines, straightening machines, crushers and ship drives. It is a widely used universal shaft product series. Its flange diameter is 160-620mm, the rated torque range is transmitted, and the axis bending angle is 15°. Structural features: Drum cardan roller universal shaft spindle coupling utilizes the characteristics of its mechanism, so that the two shafts are not on the same axis, and the connected two shafts can be rotated continuously under the condition of the included angle between the axes, and the torque and motion can be transmitted reliably. The characteristics of medium-sized universal joints are: compact structure, large transmission torque, long service life, and can be used for a long time under harsh working conditions.

Features of 4D Universal Node: High torsional stiffness and sensitivity. Zero backlash. The elastic cross slides quickly, the structure for compensating for large radial, directional and axial offsets is simple, and it is resistant to oil corrosion and electrical insulation. Set screws to fix. Aluminum alloy material For the service life of the universal coupling, turn the cross shaft 180 degrees each time it is disassembled to make the cross shaft journals alternately used. The common feature of Drum cardan roller universal shaft spindle coupling is that the amount of angular compensation is large, and the angle between the two axes of the universal coupling of different structural types is different, generally between ≤5°-45°.

Strong and rigid Drum cardan roller universal shaft spindle coupling There is no obvious elastic universal joint in the torsion direction of the torsion direction. Unequal velocity joints. If the angle between the two axes of the joint is greater than zero, the motion is transmitted with an instantaneous angular velocity ratio that varies between the output and input shafts, but the average angular velocity of the joint is equal. Cross shaft rigid universal joint is composed of universal joint fork, cross shaft, needle bearing, oil seal, sleeve, bearing cover and other parts. The working principle is: one fork drives the other fork to rotate through the cross shaft, but it can also be in the center of the cross shaft in any direction. Needle rollers of rotating needle roller bearings can be reduced in rotation.